Radflo 2.5" bracket lift coilovers

This suspension kit was designed for the extreme off roader. This kit is fully CAD designed with 3/16” and 1/8” boxed plate. We changed the upper arm mounting location to improve the geometry of the full suspension cycle. This kit is capable of 19” of wheel travel with the 2WD system and 17” of w...

This kit is a true bolt-on long travel kit. It’s fully CAD designed with 3/16” and 1/8” boxed plate. The kit is 3"" wider per side for a total of 6"" wider front track width. Compatible with both 2WD and 4WD. Bolts up to the stock spindle. Cycles 14"" wheel travel. This kit is meant to be paired...

Black Powder Coat(Full Heim) Replaces the inner and outer tie rods. This kit comes with heims and both ends of the tie rods for a stronger and firmer feel. These are much stronger than stock tie rods and also eliminate bump steer.(Outer Heim) Replaces the outer tie rod/ ball joint. This kit will ...

Fully CAD designed 4” lift spindles. Vertical 1” uniball in spindle for upper arm mount. Boxed UCA. This kit allows for increased wheel travel. Comes with heim outer steering. When paired with a lift coilover, this kit is capable of 6” of lift. This kit will increase the track width 1” per side d...

This kit will lift the rear of your Nissan Armada either 3.5" or 5.5" depending on the desired lift you choose. Bolt-on setup.  Does not include front bracket lift. Specs:  Lift: 3.5” or 5.5” Minimum Rim Size: 17” Maximum Tire Size: 37” What's Included: Steel Mounting Blocks 6061 Aluminum Space...

CAD designed. Built with 3/16” and 1/8” plate for superior strength. These are a bolt-on spindle that will drop the front of your vehicle 2” lower. These are a great option to lower your vehicle yet retain the factory ride.Specs:Lift: -2”Minimum Rim Size: 17”Track Width: StockWhat's Included:2” D...