This suspension kit was designed for the extreme off roader. This kit is fully CAD designed with 3/16” and 1/8” boxed plate. We changed the upper arm mounting location to improve the geometry of the full suspension cycle. This kit is capable of 19” of wheel travel with the 2WD system and 17” of wheel travel with the 4WD system. The 4WD kit comes with 300M race axles. It allows for the use of tires up to 37” in diameter and designed to run a 2.5 x 10” coilover and bypass shock with +1” rod ends. Engine crossover brace extra $250. **Note: This system does require fabrication work. We highly recommend to have the work done by a professional and qualified fabricator. **
Install instructions are sent via email
Specs:
2004-2015 Wheel Travel: 2WD 19”/ 4WD 17” Minimum Rim Size: 17” Maximum Tire Size: 37” Track Width: 5” Wider Per Side Coilover: 2.5 x 10” with +1” Rod Ends Bypass: 2.5 x 10” with +1” Rod Ends
What’s Included: Boxed UCA Boxed LCA Spindles Billet Tie Rods UCA/ Shock Mounts Grade 8 Hardware DOT Stainless Braided Brake Lines Black Powder Coat Extended 300M Axles (4WD Kit Only) (Axles Only Work with OEM CV’s) Stainless Misalignments All Needed Heims and Uniballs
Shipping cost will will be sent separately
Titan/ Armada Bolt-On LT Kit (4WD and 2WD)
CJD-147
Regular price$4,125.00
Save $-4,125.00
This kit is a true bolt-on long travel kit. It’s fully CAD designed with 3/16” and 1/8” boxed plate. The kit is 3"" wider per side for a total of 6"" wider front track width. Compatible with both 2WD and 4WD. Bolts up to the stock spindle. Cycles 14"" wheel travel. This kit is meant to be paired with our custom made bolt-on 2.5"" Radflo coilover. Option to run with the 2WD 4"" lift spindle kit. Comes with limit straps. The top mount does need to be welded to the frame for the limit straps to work. 4WD comes with a pair of 300M axles to complete the kit. (Axles only work with OEM CV's) 2WD lift spindle option available.
Options: Boxed UCA that works with aftermarket shock hoops. Add this option to the notes at check out if this option is needed.
Specs:
Wheel Travel: 14” Minimum Rim Size: 17” Maximum Tire Size: 37”
Track Width: 3” Wider Per Side
Coilover: Custom Radflo 2.5” with Reservoirs
What’s Included:
Boxed UCA
Boxed LCA
Billet Tie Rods
Grade 8 Hardware
DOT Stainless Braided Brake Lines
Black Powder Coat
Extended 300M Axles (4WD Kit Only) (Axles Only Work with OEM CV’s)
Stainless Misalignments
All Needed Heims and Uniballs
Titan/ Armada Mid Travel Kit
CJD-160
Regular price$2,090.00
Save $-2,090.00
Black Powder Coat (Full Heim) Replaces the inner and outer tie rods. This kit comes with heims and both ends of the tie rods for a stronger and firmer feel. These are much stronger than stock tie rods and also eliminate bump steer. (Outer Heim) Replaces the outer tie rod/ ball joint. This kit will tighten up the front end and steering. Connects to the stock inner tie rod. Runs a heim outer. Specs: Stock Replacement Bolt-On
Fully CAD designed 4” lift spindles. Vertical 1” uniball in spindle for upper arm mount. Boxed UCA. This kit allows for increased wheel travel. Comes with heim outer steering. When paired with a lift coilover, this kit is capable of 6” of lift. This kit will increase the track width 1” per side due to hub placement. This kit is the best way to get lift yet retain the factory ride. Specs: Lift: 4” Minimum Rim Size: 17” Maximum Tire Size: 35” Track Width: 1” Wider per Side
What's Included: Lift Spindles Boxed UCA Billet Heim Steering DOT Stainless Braided Brake Lines Stainless Misalignments Grade 8 Hardware All Needed Heims and Uniballs
Fabricated Ford 9" Axle
CJD-187
Regular price$2,530.00
Save $-2,530.00
Secifications:
35 spline axles
3.5" 3/8" tubing
Fabricated housing with 1/8"-3/8" plate
CNC machined tubing ends
Laser cut tone rings
Up to 3" wider than stock (per side)
Gearing Options:
3.00 3.25 3.40 3.50 3.70 3.75
3.89 4.11 4.29 4.30 4.57 4.71
4.86 5.14 5.29 5.43 6.00 6.20
6.50
Titan Bolt-On Bed Cage
CJD-110
Regular price$1,265.00
Save $-1,265.00
This is a bolt-on prerunner style bed cage for the Nissan Titan. This only requires 4 bolt holes to be drilled in the frame for install (no welding required). Set up for an 18" travel shock. This set-up will work with both over leaf and under leaf springs. Capable of up to 18” of wheel travel with the correct shocks, springs and shackles. Specs: Recommended Deaver Leaf Pack: U358 Recommended Shocks: 3.0 x 18” Travel Bypass. 3.0 x 16” Travel Bypass with Rod End Extensions. Shock Manufacture: All Brands Will Work Axle: 2.5” Wheel Spacers Are Required
CAD designed. Built with 3/16” and 1/8” plate for superior strength. These are a bolt-on spindle that will drop the front of your vehicle 2” lower. These are a great option to lower your vehicle yet retain the factory ride. Specs: Lift: -2” Minimum Rim Size: 17” Track Width: Stock
What's Included: 2” Drop Spindles Black Powder Coat
Made to order
Titan Long Travel/ Drop Shackles
CJD-116
Regular price$176.00
Save $-176.00
Bolt-on application. These offer 1” of rear drop. CAD designed and made from 3/16” plate. Fully rebuildable bushings with zerk fittings. Specs: Lift: -1” Stock Replacement
What's Included: Drop Shackles Urethane Bushings Zerk Fittings Black Powder Coat
Titan/ Armada Stock Replacement Boxed LCA
CJD-163
Regular price$1,365.00
Save $-1,365.00
These arms are fully CAD designed and made with 3/16” and 1/8” boxed plate. We have redesigned these arms to eliminate axle rubbing on the shocks for 4wd owners. These arms run a 1” uniball vs a ball joint for increased articulation and strength. The arms are fully rebuildable. Comes with greasable bushings. Arms come fully assembled for easy install. Sway bar mount optional. Specs: Lift: 0-3” Minimum Rim Size: 17” Maximum Tire Size: 35” Track Width: Stock
This upper arm is meant to replace the stock arms. Theses arms allow for more coil bucket clearance when lifting your vehicle. The Titan Stock Replacement UCA come with heim pivots at the frame which allow for more wheel adjustment when aligning your vehicle. Comes with uniballs at the spindle pivot for more articulation and strength. Optional Delta Joint available for inclement weather areas. Arms come fully assembled for easy install. Specs: Lift: 0-3” Minimum Rim Size: 17” Maximum Tire Size: 35” Track Width: Stock
What's Included: Tube UCA Stainless Misalignments Grade 8 Bolts All Needed Heims and Uniballs Black Powder Coat
Titan/ Armada Full Heim Steering
CJD-154
Regular price$495.00
Save $-495.00
Replaces the inner and outer tie rods. This kit comes with heims and both ends of the tie rods for a stronger and firmer feel. These are much stronger than stock tie rods and also eliminate bump steer.
Specs:
1st Gen (2004-2015) Stock Replacement Bolt-On
What's Included:
Sold in pairs CNC Rack Bolt CNC Clevis Billet Tie Rods Grade 8 Hardware Stainless Misalignments All Needed Heims
E-Fan Kit
CJD-029
Regular price$632.50
Save $-632.50
Bolt-on electric fan setup for the Nissan Titans, Armadas, Frontiers, Xterras and Pathfinders. Comes with dual 2100 CFM (each) fans and dual electronic fan controller. This setup will work with both stock and CSF radiators. Comes with everything needed. Just remove the stock fan clutch and fan shroud, slide this setup in and wire in power and ground.
Specs:
Stock Replacement Fan Shroud
Drop in Ready
What's Included: Aluminum Fan Shroud
Dual 2100 CFM Fans
Electronic Dual Fan Controller
Dual Breakers
Probe Hose Kit
Titan/ Armada Motor Mounts
CJD-162
Regular price$220.00
Save $-220.00
CAD designed. Made from 3/16” plate. Dual bushing setup. Stock replacement. Sold in pairs. Specs: Stock Replacement Rebuildable
What's Included: Motor Mounts (Pair) Black Powder Coat
Titan/ Armada 2WD Transmission Mount
CJD-145
Regular price$203.50
Save $-203.50
CAD designed. Stock replacement. Made from 3/16” plate for increased strength over stock. Dual bushing design. Fully rebuildable. Built to last. 2WD version, 4WD also available. Specs: Stock Replacement Rebuildable
What's Included: Transmission Mount Hardware Kit Black Powder Coat
Stock Replacement LCA Bushing Kit
CJD-099
Regular price$159.50
Save $-159.50
Delrin bushings with steel inner sleeves. These bushings will replace the stock LCA bushings. Unlike the stock setup, these bushings have shoulders to prevent lower arm movement. Designed to fit OEM lowers. Specs: Stock Replacement Greaseable Rebuildable
Description: Painted any basic color. Mounting option: 3M double sided tape or welded bolts to the back. Specs: Size: 4x10” Painted
What's Included: T Emblem
Titan Heim Steering Outers
CJD-114
Regular price$225.00
Save $-225.00
Replaces the outer tie rod/ ball joint. This kit will tighten up the front end and steering. Connects to the stock inner tie rod. Runs a heim outer. Specs: Stock Replacement Bolt-On
What's Included:
Sold in pairs Billet Tie Rods Stainless Misalignments Grade 8 Bolts All Needed Heims
Sway Bar End Links
CJD-100
Regular price$99.00
Save $-99.00
Replaces the stock bushing style end link.
Allows for more movement.
Adjustable.
Stock length to custom sizes.
Stock length: 0-3" lift
Extended length: bracket lifts
Sold as a pair
Adjustable cam bolts
CJD-011
Regular price$46.25
Save $-46.25
Adjustable lower arm cam bolts. Comes in a set of 2. 2 sets are needed if replacing both lower arms.
Universal Coilover Spanner wrench 2.0" / 2.5"
Regular price$18.75
Save $-18.75
Designed for adjusting the spring preload rings on 2.0" and 2.5" Fox, Sway-A-Way, King and Radflo coil over shocks.
*Please specify 2.0" or 2.5"
Tubed Traction Bars
CJD-171
Regular price$450.00
Save $-450.00
1.75" DOM tubing. Frame mount can be welded on or bolted. Heim one end and bushing other. Bolt on axle mount. Comes powder coated black with all hardware needed for install.
Titan Rear Brake line kit
CJD-120
Regular price$99.00
Save $-99.00
Designed to replace stock rubber brake hoses on vehicles with increased ride heights. Steel Braided lines will not swell under increased braking pressure demanded by larger tires thus delivering a quick and positive response. Hoses comply with D.O.T. specifications and are packaged as a complete kit.
Low profile bed stiffeners
CJD-074
Regular price$137.50
Save $-137.50
These bed low profile bed stiffeners bolt right on (nuts and bolts provided) and will add strength to the well known flimsy beds. Come painted black. $25 extra for black powder coat. Simi universal
Titan Radflo 2.0 Rear Shocks
Regular price$415.00
Save $-415.00
Radflo OE Replacement 2.0" Diameter, Rear Smooth Body Shocks, Emulsion, for the 2004-2016 Nissan Titan | Sold in individually
Availability: All Radflo OE Replacement Shocks are custom built-to-order, and uniquely valved to meet you and your vehicle's unique needs and specifications.
Titan/ Armada 2.5 Coil-Over
Regular price$1,535.00
Save $-1,535.00
The Radflo 2.5″ coil-over kit for the 2005+ Titan is the ultimate suspension upgrade. The coil-overs are adjustable from 1″ – 2.5″ of lift height. The 2.5″ diameter shocks are a huge improvement in both ride quality and performance. The coil-overs are offered in standard length or extended for use with aftermarket upper control arms. All Radflo coil-overs come with world renowned Eibach springs. Kit contains two front coil-overs with mounting hardware.
2.0 Coil-Over Kit
Regular price$1,040.00
Save $-1,040.00
The Radflo 2.0″ front coil-overs are the perfect budget friendly shocks for the 2004+ Nissan Titan. The Coil-overs are custom valved for the vehicle and offer a huge improvement in ride quality and performance on or off the road. The front coil-overs are adjustable up to 2.5 inches of lift height and allow fitment of larger tires. Radflo coil-overs come pre-loaded with world renowned Eibach coil-springs We strongly recommend that you purchase the Radflo 2.0″ Spanner wrench in order to adjust the shocks for lift height.
5100 Series Ride Height Adjustable Shock Absorber BIL24-197649
Regular price$157.00
Save $-157.00
Bilstein 5100 Series Ride Height Adjustable Shock Absorber
Collapsed Length (IN): 11.37
Extended Length (IN): 15.61
Travel Length (IN): 4.24
Shaft Diameter: 14mm
Reservoir: No
Finish: Zinc plated
Body Design: 46mm ID snap ring grooved body (Coilover)
Internal Design: Mono tube
Boot Included: No
Bilstein 5100 Series Ride Height Adjustable Shock Absorbers are designed for front coilover style pickup suspensions. The monotube shocks feature a 46mm digressive piston with self-adjusting deflective disc valving. Multiple snap-ring grooves in the shock body allow for different spring seat positions, providing 0"-2.5" of front end lift, depending on application. Provides increased wheel travel and improved handling! (zinc-plated steel body, Triple-C-Technology coating)
*Please specify year, make and model.
Titan/ Armada Stock Replacement Boxed UCA
CJD-165
Regular price$990.00
Save $-990.00
Fully boxed CAD design. This upper arm is meant to replace the stock arms. Theses arms allow for more coil bucket clearance when lifting your vehicle. Comes with heim pivots at the frame which allow for more wheel adjustment when aligning your vehicle. Uniballs at the spindle pivot for more articulation and strength are included. Optional Delta Joint available for inclement weather areas. Arms come fully assembled for easy install. Specs: Lift: 0-3 Minimum Rim Size: 16” Maximum Tire Size: 35” Track Width: Stock
What's Included: Boxed UCA Stainless Misalignments Grade 8 Bolts All Needed Heims and Uniballs Black Powder Coat
Titan/ Armada 4WD Transmission Mount
CJD-146
Regular price$192.50
Save $-192.50
CAD designed. Stock replacement. Made from 3/16” plate for increased strength over stock. Dual bushing design. Fully rebuildable. Built to last. 4WD version, 2WD also available. Specs: Stock Replacement Rebuildable
What's Included: Transmission Mount Hardware Kit Black Powder Coat
Titan Rear Bumper
CJD-123
Regular price$1,017.50
Save $-1,017.50
Bolts to stock mounts. Comes with led flush mount cube lights. Option: Black powder coat. Shipping cost will be sent prior to item shipping out.
Titan Boxed Traction Bars
CJD-112
Regular price$715.00
Save $-715.00
CAD designed. Designed to prevent axle wrap. Bushing on the axle side and heim on frame side for increased articulation over dual bushing setups. Axle side mounts up to the stock u-bolts. Frame side can be welded or bolted on (bolts not supplied) Specs: Lift: 0-6” Fully Rebuildable Design
This boot is used as a cover from the steering rack to the rod on the full heim steering kit. These are sold individually
Titan/ Armada LED Pod Mounts
CJD-155
Regular price$55.00
Save $-55.00
These mounts bolt under the wiper cowl. They come as a set. Come painted black.
Specs: Bolt-On
What's Included: Pair Pod Mounts Painted Black
Daily Driver Link Kit
CJD-020
Regular price$5,525.50
Save $-5,525.50
Daily driver link kit is a great way to link your truck yet keep the stock gas tank. This kit cycles 22" of rear wheel travel with the coilover and bypass setup. This kit requires fabrication to be done to the truck for the install. We highly recommend having a professional install this setup. This kit is built to order.
Whats included:
Boxed lower trailing arms
Tube upper link
Tube panhead bar
Lower link mounts
Upper link mounts
Panhead bar mounts
All heims, uniballs, misalignment spacers and hardware
Options:
Tube lower links (coilover only setup)
Coilover and bypass shock hoop
Coilover only shock hoop
Shipping: This kit ships by pallet. Shipping payment will be sent prior to shipping.
Made to order.
Radflo 2.5" bracket lift coilovers
Regular price$1,350.00
Save $-1,350.00
Radflo OE Replacement 2.5" Diameter, Front Coil-Over Shocks with IFP, Extended for use with Aftermarket UCA, for 2004-current Nissan Titan | Sold in pairs
Please specify if the lift is 4" or 6"
Availability: All Radflo OE Replacement Shocks are custom
Bolt On longtravel kit coilover
Regular price$2,060.80
Save $-2,060.80
This is a specifically designed coilover for our Titan Bolt On Long Travel kit. It is a 2.5" diameter coilover for more oil capacity. This coilover comes with reservoirs. Adjustable compression adjusters available at an extra cost. (shocks are made to order) Sold as a pair
Front brake line kit
CJD-034
Regular price$99.00
Save $-99.00
Designed to replace stock rubber brake hoses on vehicles with increased ride heights. Steel Braided lines will not swell under increased braking pressure demanded by larger tires thus delivering a quick and positive response. Hoses comply with D.O.T. specifications and are packaged as a complete kit.
Titan Radflo 2.5 rear shock with reservoir
Regular price$530.00
Save $-530.00
Radflo takes great pride in manufacturing premier shock absorbers that are engineered to outlast and outperform the competition. Through refined craftsmanship Radflo's products are built to order and all component are manufactured from the highest quality materials and machined engineering. As a result our product line is not only efficient but dependable and provide high performance outcomes. Our commitment is to provide top tier client services to our loyal-passionate consumer base and enthusiasts without compromising quality and price. We thank you for selecting Radflo.
Nissan Titan Prerunner bumper
CJD-082
Regular price$1,610.00
Save $-1,610.00
Bolt on Nissan Titan prerunner style front bumper. 1.75" .120 DOM tubing. Bumper bolts to existing frame mounts. Black powder coated. Email for options such as abs valance, light, top hoop, etc.
Years - 2004-2015
**4-8week build time ETA**
5100 Series Shock Absorber -BIL24-186773
Regular price$110.00
Save $-110.00
5100 Series Shock Absorber
Collapsed Length (IN): 14.96
Extended Length (IN): 23.76
Travel Length (IN): 8.8
Lower Mount: Eye 14mm
Upper Mount: Eye 14mm
Shaft Diameter: 14mm
Reservoir: No
Finish: Zinc plated
Body Design: 46mm ID smooth body (Non-coilover)
Internal Design: Mono tube
Boot Included: Yes
Bilstein’s 5100 Series Shocks offer traditional Bilstein technology with applications for lifted trucks, Jeeps and prerunners. 5100 Series shocks feature Bilstein's superior single tube high gas pressure design for the upmost in consistent fade-free performance and long life. Features include:Monotube gas pressure construction, Self-Adjusting Deflecting Disc Valving, High-Flow Piston Reduces Harshness, Independent Rebound & Compression Tuning, Larger Working Piston Area for Exact Damping, Superior Control for Large Diameter Tires and Designed for specific manufacturer lift kits utilizing the stock O.E.M. mounting configuration.
*Please specify year, make and model.
4600 Series Shock Absorber
Regular price
$82.99Sale price$74.99
Save $8.00
Bilstein 4600 series
Body Diameter:2 in
Type:monotube
Finish:yellow
Reservoir:no
Boots included: yes
Bilstein's technically superior, patented monotube gas charged design allows the excessive heat from the oil to transfer to the outer surface of the shock body and dissipate more efficiently. The dividing piston also permits the oil to expand as heat builds, preventing aeration (foaming) and viscosity loss. This allows the shock to maintain full damping characteristics as temperatures rise.The tube of a Bilstein Gas Pressure Shock Absorber is fabricated using a special extrusion method. This process achieves an extremely tight peak-to-valley tolerance and maintains consistent wall thickness. Bilstein's seamless monotube design provides superior tube strength while maximizing heat dissipation and shock life.The piston head design allows independent tuning of the compression and rebound damping forces to provide optimum ride comfort and performance without compromise. It features fewer parts than most conventional twin tube and so called road sensing shock designs. This simple, yet exceptionally functional digressive design contributes to the extreme durability and long life of Bilstein Shock Absorbers.
*Please specify year, make and model.
Long Travel 4 Link Bars
CJD-070
Regular price$1,045.00
Save $-1,045.00
DOM tubing and steel plate. 59" long. Comes with all hardware. Setup for coilovers and bypass shocks. Comes powder coated black.
Titan Hybrid Front Bumper
CJD-115
Regular price$1,072.50
Save $-1,072.50
Tube and plate bumper. Comes with 30" led light bar. Bolts up to stock mounts. Comes Black powder coated. Made to order. Shipping cost will be sent prior to product being sent
Spare Tire mount
CJD-096
Regular price$220.00
Save $-220.00
This spare tire mount is set up to mount to the utility tracks on the bed sides of the vehicle. This mount is adjustable for various tire sizes. Can be mounted anywhere on the railing. Welded mounts for cable lock to secure rim.
Whats included:
Mounting plate
Spanner wrench
Urethane mounting cone
Mounting bracket
Hardware
Comes painted black
Powder coat extra
Titan Deaver long travel leaf springs P55
Regular price$1,150.00
Save $-1,150.00
10 leafs, military wrap, diamond cut ends, anti-friction pads and four piece bolt through retaining clips. Made to order item lead times may vary.
These springs come with 1" of added lift. (extra lift can be added upon request) Capable of up to 18" of rear wheel travel with correct shock and shackle package.
Shipping cost is extra
Whats included:
Leaf Springs (pair)
Bushings & Sleeves (if necessary)
Battery box
CJD-015
Regular price$220.00
Save $-220.00
This is a direct fit, steel battery box. This is designed to replace the plastic setup that comes stock. This box will bolt right in and will have a new steel mounting bracket for the fuse box as well. It is designed to house a red, yellow or blue top Optima group 34/78 battery however, others may fit as well. Tig welded
Battery size spec: L 9.9"x W 6.8"x H 7.8"
Bilstein 24-311137 B8 6100 Series Front Shock for 1st Gen Titan & 2nd Gen Nissan Armada
Regular price$319.00
Save $-319.00
Bilstein B8 6100 (Ride Height Adjustable) shock absorbers are designed for trucks and SUV's with a front OE coilover style suspension. Multiple snap-ring grooves in the body allow for different spring seat positions, providing an adjustable ride height range of 0-2.5 inches (depending on application). The B8 6100 (Ride Height Adjustable) utilizes a large 60mm digressive piston. This will provide a smoother ride while offering more control over rough terrain. The B8 6100 (Ride Height Adjustable) will provide increased durability and heat dissipation, making them perfect for vehicles subjected to rugged roads and harsh conditions.
CAD designed and made from 3/16" steel. These go right into place over the stock cam bolt holes. These are required to be welded on. They come in a full set of 8 mounts. So if you're looking to reinforce the stock holes, these will be your ticket.
What's included:
8- 3/16" steel plate gussets
1" uniball
CJD-003
Regular price$26.95
Save $-26.95
Stainless Steel Series spherical bearings are a precision grade spherical bearing. Each bearing is made from Stainless Steel with a PTFE liner and has tighter tolerances than traditional spherical bearings.
Coilover top mount
CJD-019
Regular price$275.00
Save $-275.00
This mount is designed to sit on top of the stock coil bucket and allow the use of a longer coilover shock. Bolts to existing holes. These mounts allow for a wide range of coilovers to be ran vs the stock replacement style. They allow the use of an external reservoir as well.
Whats included:
2- coilover top mount
2- under mount rings
Hardware
Note: Enlarging the existing coil bucket center hole is required to run this setup.
Long travel extended axles
CJD-071
Regular price$700.00
Save $-700.00
These axles are designed to be ran with out Race LT kit or our Bolt on LT kit. Made out of 300M material and CNC made and heat treated. These axles will only work with OEM CV joints
Titan rear bed mount Molle panels
CJD-117
Regular price$126.50
Save $-126.50
Our Molle panels are designed to fit into the stock Utili-track sytem. CAD designed, CNC cut and bent to perfection providing a seamless fit. Our mounts are designed to be strong but light and extremely versatile to allow you to mount anything from Molle bags, trail gear, tools, High Lift jacks, axes, shovels and more for use on the road and trail. Each panel comes with cut slots as well as 1/4" riv-nuts preinstalled for even more mounting options. These panels come with a bed lined finish.
Panels fit 04-20 Titans
Titan front bed mount Molle panel
CJD-113
Regular price$192.50
Save $-192.50
Our Molle panels are designed to fit into the stock Utili-track sytem. CAD designed, CNC cut and bent to perfection providing a seamless fit. Our mounts are designed to be strong but light and extremely versatile to allow you to mount anything from Molle bags, trail gear, tools, High Lift jacks, axes, shovels and more for use on the road and trail. Each panel comes with cut slots as well as 1/4" riv-nuts preinstalled for even more mounting options. These panels come with a bed lined finish.
Panels fit 04-20 Titans
Rear wing light bar mounts
CJD-092
Regular price$915.00
Save $-915.00
This kit is setup for the rear of you Nissan Titan to be able to run a 40" chase light bar. The mounts are made from 5051 aluminum plate. The side wings do require drilling into the cab for mounting. The kit comes with self sealing bolts.
Whats included:
2 - side wing mounts
1 - 3rd brake light block off plate
Hardware
Flag mount
CJD-033
Regular price$59.75
Save $-59.75
Flag mount for the bed of your truck. Can be used with or without utili-track system. Made to fit any 1" diameter flag poles.
What's included:
Flag pole mount
Mounting hardware
Come coated in Steel-It
UCA rebuild kit
CJD-174
Regular price$148.50
Save $-148.50
Wore out upper control arms? This kit is what you need to rebuild and refresh them
What's included:
2 - 1" uniballs or Delta Joints
2 - 1" uniball snap rings
4 - 3/4" JMX right hand heims
4 - 3/4" jam nuts
JAZ fuel cell adapter
CJD-066
Regular price$247.50
Save $-247.50
This adapter allows the use of the stock Titan fuel pump/ sending unit in your JAZ fuel cell. Has a 2.5" fuel inlet and spot for a -10 fitting for a breather. Just bolt in the stock unit into the adapter and install directly in the fuel cell and your ready to go.
Powder coat is extra. (Allow extra time for powder coat)
2.0/2.5" Bearing Spacers for Nissan Frontier/Xterra/Titan Lower Coil Over - M14x42mm
Regular price$30.00
Save $-30.00
Replacement bearing spacers for Radflo 2.0" and 2.5" Nissan coil-overs. M14 x 42 mm. Made from 303 stainless steel to prevent premature wear and rusting. 2 spacers are included. Enough to replace spacers on one bearing. These are for front lower Nissan OE coil over shocks only.
Single speed compression adjuster
Regular price$175.00
Save $-175.00
The compression adjuster technology provides drivers the highest level of dampening customization and allows drivers to quickly fine-tune ride quality and performance for street or the most demanding off-road conditions, just with their fingertips.
Note: shock must have reservoir for compression adjuster to work.
Sign up and save
Sign up for our newsletter to recieve the latest news and promotions from CJD!