One piece CAD design with 5/16” plate. These shackles will give up to 2” of rear lift.

Specs:

Lift: 0-2” Lift

Stock Replacement

What's Included: Lift Shackles

Grade 8 Hardware

Black Powder Coat

Designed to replace stock rubber brake hoses on vehicles with increased ride heights. Steel Braided lines will not swell under increased braking pressure demanded by larger tires thus delivering a quick and positive response. Hoses comply with D.O.T. specifications and are packaged as a complete kit.

Bolt-on electric fan setup for the Nissan Titans, Armadas, Frontiers, Xterras and Pathfinders. Comes with dual 2100 CFM (each) fans and dual electronic fan controller. This setup will work with both stock and CSF radiators. Comes with everything needed. Just remove the stock fan clutch and fan shroud, slide this setup in and wire in power and ground.

Specs:

Stock Replacement Fan Shroud

Drop in Ready

What's Included: Aluminum Fan Shroud

Dual 2100 CFM Fans

Electronic Dual Fan Controller

Dual Breakers

Probe Hose Kit

Replaces the stock bushing style end link.

Allows for more movement.

Adjustable.

Stock length to custom sizes.

Stock length: 0-3" lift

Extended length: bracket lifts

Sold as a pair

If you're looking to Titan swap your Frontier (2005-2019) or Xterra (2005-2015) but retain the factory R180 front differential, this is the axle you need to retain your 4 wheel drive.  Axle comes ready to bolt up and go.

Sold each

Replaces the outer tie rod/ ball joint. This kit will tighten up the front end and steering. Connects to the stock inner tie rod. Runs a heim outer.
Specs:
Stock Replacement
Bolt-On

What's Included:

Sold in pairs
Billet Tie Rods
Stainless Misalignments
Grade 8 Bolts
All Needed Heims

Adjustable lower arm cam bolts. Comes in a set of 2. 2 sets are needed if replacing both lower arms.

Designed for adjusting the spring preload rings on 2.0" and 2.5" Fox, Sway-A-Way, King and Radflo coil over shocks.

*Please specify 2.0" or 2.5"

This upper arm is meant to replace the stock arms. Theses arms allow for more coil bucket clearance when lifting your vehicle. The Titan Swap UCA come with heim pivots at the frame which allow for more wheel adjustment when aligning your vehicle. Comes with uniballs at the spindle pivot for more articulation and strength. Optional Delta Joint (614560) available for inclement weather areas. Arms come fully assembled for easy install.
Specs:
Lift: 0-3”
Minimum Rim Size: 16”
Maximum Tire Size: 35”
Track Width: + 3" per side

What's Included:
Tube UCA
Stainless Misalignments
Grade 8 Bolts
All Needed Heims and Uniballs
Black Powder Coat

Replaces the inner and outer tie rods. This kit comes with heims and both ends of the tie rods for a stronger and firmer feel. These are much stronger than stock tie rods and also eliminate bump steer.
Specs:
Stock Replacement
Bolt-On

What's Included:

Sold in pairs
CNC Rack Bolt
CNC Clevis
Billet Tie Rods
Grade 8 Hardware
Stainless Misalignments
All Needed Heims

Tired of breaking those cheap plastic grab handles? CJD Racings Nissan Aluminum Grab Handles solve that problem in fashion.

Details

- 6061-T6 Aluminum

- Mounting Hole Length 9 13/16"

- CNC Machined

- Raw Aluminum Finish

2.5 diameter coilover

Specifically designed for Titan swapped front ends.

Completely rebuild-able shock.

Spring rates available: 600lbs, 650lbs, 700lbs. When choosing your spring rate, please add to the notes the rate you choose.

Sold as a pair

Replaces the inner and outer tie rods. This kit comes with heims and both ends of the tie rods for a stronger and firmer feel. These are much stronger than stock tie rods and also eliminate bump steer.
Specs:
Stock Replacement
Bolt-On

What's Included:

Sold in pairs
CNC Rack Bolt
CNC Clevis
Billet Tie Rods
Grade 8 Hardware
Stainless Misalignments
All Needed Heims

CAD designed and made from 3/16" steel. These go right into place over the stock cam bolt holes. These are required to be welded on. They come in a full set of 8 mounts. So if you're looking to reinforce the stock holes, these will be your ticket.

What's included:

8- 3/16" steel plate gussets

These mounts bolt under the hood to the existing hood hinge bolts. They come as a set. Come painted black.
Specs:
Bolt-On

What's Included:
Pair Pod Mounts
Painted Black

Wore out upper control arms? This kit is what you need to rebuild and refresh them

What's included:

2 - 1" uniballs or Delta Joints

2 - 1" uniball snap rings

4 - 3/4" JMX right hand heims

4 - 3/4" jam nuts

Stock replacement steel battery box for the Nissan Frontier, Xterra and Pathfinder.

This box bots into the stock position. Will work with both stock Group 24 and Optima style batteries.

Whats included:

Battery box

All needed hardwear

Options:

Painted

Powder coated black

Ditch the problematic stock breather! The stock breather is a major failure on these vehicles.  Extend the life of your axle seals and gears with these breather kit.

Getting moisture in your differential is a bad idea. When you open a differential that is filled with water you will find milky running oil that is clearly incapable protecting your gears. Many factory axles have a breather raised much higher than water is expected to reach.

When you do an axle swap you should consider whether your axle will suck in fluid when it crosses water. Don't take the risk! Use our axle housing breather kit on your Nissan axles.

***Actual parts my differ from picture***

Kit Includes:

• 5' or 8' option of High Quality Rubber Fuel Hose
  
• Brass Barb Fitting with Nissan Thread. Tapered thread for a tight fit to axle housing.
• Optional filter

Designed to replace the stock rear bumper. This bumper is designed to bolt on existing mounts. Made from 3/16" steel plate. This bumper comes with 1" thick clevis mount along with flush mount LED pod lights. We have even integrated a rear hitch into the bumper.

Optional tire swing out. Swing out comes with tire mount for up to a 37" tire and mounting location for Rotax tank.

These are made to order.

This kit allows the user to run their u-bolts from the bottom up. This means no low hanging bolts to get hung up when you're off roading. Laser cut and CNC bent bash plates. Sold as a pair.

Black Powder Coat
(Full Heim) Replaces the inner and outer tie rods. This kit comes with heims and both ends of the tie rods for a stronger and firmer feel. These are much stronger than stock tie rods and also eliminate bump steer.
(Outer Heim) Replaces the outer tie rod/ ball joint. This kit will tighten up the front end and steering. Connects to the stock inner tie rod. Runs a heim outer.
Specs:
Stock Replacement
Bolt-On

What's Included:
CNC Rack Bolt (Full Heim)
CNC Clevis (Full Heim)
Billet Tie Rods
Grade 8 Hardware
Stainless Misalignments
All Needed Heims

Frontier and Xterra dash MOLLE panel fits in the existing pocket above the radio. Perfect to mount items such as a GPS, CB radio, phone mount and much much more.

CNC cut aluminum

Black coating

Comes with all needed mounting hardware 

This kit comes with both innner and outer heims needed to rebuild your steering system 

Whats included:

2- outer heims 

2 - inner heims 

4 - jam nuts

Looking to install a Titan Swap front end on your Frontier or Xterra but not break the bank? This is the perfect kit. Comes with everything needed to install. Just pair with your favorite pair of shocks/ coilovers and your ready.

Whats included:

CJD Titan swap tube UCA (pair) or SPC Titan swap UCA (pair)

Stock Titan LCA (pair)

Extended heim steering

Brake lines

R180 extended axles (4wd only)

This spindle is meant to replace the existing spindle that comes with a 6" bracket lift. This spindle is fully fabricated and CAD designed. Designed for corrected steering position to help bump steer. No more shock contact due to steering arm position. Comes complete with full heim steering. This is a great upgrade for those that wheel with their bracket lifts. Built to order.

Note: With stock length control arms, this spindle will not work with 2.5" coilovers, only 2.0. Titan swap length works with both 2.0" and 2.5" coilovers

Specs: Lift: 6”

Minimum Rim Size: 16”

What's Included: Spindles

Billet Full Heim Steering

Grade 8 Hardware

Stainless Misalignments

All Needed Heims

Black Powder Coat

The CJD Racing Xterra Door Molle Panels allow you to make the most of the limited cab space in your Xterra. The door panels are a great way to free up space and secure useful items like your flashlight, walkie, fire extinguisher, etc. All panels are CNC cut to ensure perfect fitment and are an overall great addition to any overland or off road rig!

Specs

Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.

Replaces the outer tie rod/ ball joint. This kit will tighten up the front end and steering. Connects to the stock inner tie rod. Runs a heim outer.

Specs:
Stock Replacement
Bolt-On

What's Included:

Sold in pairs
Billet Tie Rods
Stainless Misalignments
Grade 8 Bolts
All Needed Heims

Bilstein B8 5100 (Ride Height Adjustable) shock absorbers are designed for trucks and SUV's with a front OE coilover style suspension. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). The monotube shock absorbers feature a 46mm digressive piston a with self-adjusting deflective disc valve setting. Bilstein B8 5100 (Ride Height Adjustable) shock absorbers provide increased wheel travel and improved handling. Utilizing a B8 5100 (Ride Height Adjustable) shock absorber is the easiest way to level out your vehicle.

CJD Racing fabricated shock mount with integrated UCA mounts

Allows up to 14" wheel travel on a Titan swap setup with an 8" travel coilover and +1" longer rod end and the correct suspension components

Made from 3/16" plate steel

Included:

Driver and passenger side mounts

Grade 8 hardware

Install instructions

***Suggested install by experienced fabricator***

***Adjustable heim UCA's suggested***

The compression adjuster technology provides drivers the highest level of dampening customization and allows drivers to quickly fine-tune ride quality and performance for street or the most demanding off-road conditions, just with their fingertips.

Note: shock must have 2.5" diameter reservoir for dual speed compression adjuster

The compression adjuster technology provides drivers the highest level of dampening customization and allows drivers to quickly fine-tune ride quality and performance for street or the most demanding off-road conditions, just with their fingertips.

Note: shock must have reservoir for compression adjuster to work.

Steering rack bushing kit. Comes with 3 bushings to rebuild your worn out rack bushings.

#sprSPF3028K

Stainless steel steering tapper misalignment adapter.

Sold each

CSF - 7029

05-10 Niss Frontier, 05-10 Niss Pathfinder, 05-10 Niss Xterra, (All Aut & Manl)

05-10 Nissan Frontier.

CSF, The Cooling Experts, have been serving the US aftermarket for almost 4 decades. With over 30 million units sold, CSF is your exclusive source for Radiators, Condensers, Intercoolers, Inverter Coolers, Racing Radiators and Pressure Caps.

Stainless Steel High Misalignment spacer reduces a 3/4 inch bore (heim or uniball) to a 1/2 inch bolt hole. Mounting width (pair) when installed is 2 inches overall.

Sold each

Dirt Bagz shock covers are designed to protect your shocks from dirt, mud, sand and debris to protect the shock's shaft and seals.

The minimum outside diameter of your spring can be 3-1/2" and the maximum outside diameter of your spring can be 4-1/2" for the velcro to still catch

Sold as a pair.

Features:

• Fits both 2.0 and 2.5 Fox, King, Radflo, Locked and Sway-A-Way Shocks
• Standard size is 15" long
• No Tools Needed with Velcro fastening

10 leafs, military wrap, diamond cut ends, anti-friction pads and four piece bolt through retaining clips. Made to order. Lead time may very.

Add lift to the rear with these full leaf packs. Extra weight can be added to the springs as needed.

Sold as a pair.

Whats included:

10 leafs, military wrap, diamond cut ends, anti-friction pads and four piece bolt through retaining clips.

Note: Shipping cost will be sent in a separate invoice after purchase. we ship world wide

FOX PERFORMANCE SERIES 2.0 COIL-OVER IFP SHOCK - 983-02-054

FOX Performance Series shocks contain the latest in shock technology to transform the performance of your Truck or SUV. They use our race-proven damping control to provide a comfortable on-road ride and predictable off-road handling in even the toughest conditions.

• Performance Tuned For Vehicle Specific Application
• Aluminum Body Dissipates Heat Faster Than Steel
• IFP Separates Oil From High-Pressure Nitrogen Gas
• Black Anodized CNC Machined Aluminum Components

Tech Specs:

• Shock Type: Coil-Over Shock
• Reservoir Type: Internal Floating Piston (IFP)
• Travel: 4.19 Inches
• Compressed Length: 11.50 Inches
• Extended Length: 15.69 Inches
• Diameter: 2.0 Inches
• Product Series: Performance

Fully CAD designed 4” lift spindles. Vertical 1” uniball in spindle for upper arm mount. Boxed UCA. This kit allows for increased wheel travel. Comes with heim outer steering. When paired with a lift coilover, this kit is capable of 6” of lift. This kit will increase the track width 1” per side due to hub placement. This kit is the best way to get lift yet retain the factory ride.
Specs:
Lift: 4”
Minimum Rim Size: 16”
Maximum Tire Size: 33”
Track Width: 1” Wider per Side

What's Included:
Lift Spindles
Boxed UCA
Billet Heim Steering
DOT Stainless Braided Brake Lines
Stainless Misalignments
Grade 8 Hardware
All Needed Heims and Uniballs

B8 Control Arms are a direct fit upgrade for factory upper control arms on trucks and SUVs. The kit contains a pair of control arms which correct the caster alignment for better straight line stability with lifted suspensions, and the improved pivot angles increase wheel travel and reduce stress on the joints. These strong black powder-coated 4130 chromoly steel arms are a tubular design which allows for more spring and shock clearance and feature greasable polyurethane bushings and heavy duty ball joints for the ideal combination of ride quality and durability with minimal maintenance needed. They come with detailed instructions and all necessary hardware for easy installation and are compatible with all Bilstein shocks and coilover kits. All components are replaceable.

This kit is a true bolt-on long travel kit. It’s fully CAD designed with 3/16” and 1/8” boxed plate. The kit is 6"" wider per side for a total of 12" wider front track width. Compatible with both 2WD and 4WD. Bolts up to the stock spindle. Cycles 14"" wheel travel. This kit is works well with a 10" stroke coilover.  4WD comes with a pair of 300M axles to complete the kit. (Axles only work with OEM Titan CV's) 

Specs:

Wheel Travel: 14” Minimum Rim Size: 17” Maximum Tire Size: 37”

Track Width: 6" Wider Per Side

Coilover: 10" Stroke 

What’s Included:

Boxed UCA

Boxed LCA

Billet Tie Rods

Grade 8 Hardware

DOT Stainless Braided Brake Lines

Black Powder Coat

Extended 300M Axles (4WD Kit Only) (Axles Only Work with OEM CV’s)

Stainless Misalignments

Limit Straps

All Needed Heims and Uniballs

Cerakote is a ceramic based finish that can be applied to metals, plastics, polymers and wood. The unique formulation used for Cerakote ceramic coating enhances a number of physical performance properties including abrasion/wear resistance, corrosion resistance, chemical resistance, impact strength, and hardness. Each of these properties is rigorously tested to guarantee that Cerakote products remain at the forefront of the ceramic coatings market. Cerakote ceramic coatings utilize state-of-the-art technology to out-perform any competitive coating in both laboratory settings and real world applications.

Note: cost is per shock.