Titan Swap Tube UCA

Titan Swap Tube UCA

CJD-167

$660.00 Save $-660.00
-31 in stock

This upper arm is meant to replace the stock arms. Theses arms allow for more coil bucket clearance when lifting your vehicle. The Titan Swap UCA come with heim pivots at the frame which allow for more wheel adjustment when aligning your vehicle. Comes with uniballs at the spindle pivot for more articulation and strength. Optional Delta Joint (614560) available for inclement weather areas. Arms come fully assembled for easy install.
Specs:
Lift: 0-3”
Minimum Rim Size: 16”
Maximum Tire Size: 35”
Track Width: + 3" per side

What's Included:
Tube UCA
Stainless Misalignments
Grade 8 Bolts
All Needed Heims and Uniballs
Black Powder Coat

You may also like

Quick view
Titan Swap Kit
from $2,090.00
Quick view
Frontier Stock Replacement Chromoly LCA
$1,375.00
Quick view
Frontier 6" Bracket Lift Replacement Spindles
$1,485.00

Titan Swap Kit

CJD-134

$2,090.00 Save $-2,090.00
CJD Nissan Frontier (Titan Swap) Mid Travel Kit Full Heims
CJD Nissan Frontier (Titan Swap) Mid Travel Kit Outer Heims
CJD Nissan Frontier (Titan Swap) Mid Travel Kit Full Heims
CJD Nissan Frontier (Titan Swap) Mid Travel Kit Outer Heims

Black Powder Coat
(Full Heim) Replaces the inner and outer tie rods. This kit comes with heims and both ends of the tie rods for a stronger and firmer feel. These are much stronger than stock tie rods and also eliminate bump steer.
(Outer Heim) Replaces the outer tie rod/ ball joint. This kit will tighten up the front end and steering. Connects to the stock inner tie rod. Runs a heim outer.
Specs:
Stock Replacement
Bolt-On

What's Included:
CNC Rack Bolt (Full Heim)
CNC Clevis (Full Heim)
Billet Tie Rods
Grade 8 Hardware
Stainless Misalignments
All Needed Heims

Frontier Stock Replacement Chromoly LCA

CJD-059

$1,375.00 Save $-1,375.00
CJD Nissan Frontier Stock Replacement Chromoly Lower Control Arm
Fully CAD designed for maximum strength. These arms are made from 1/8” 4130 plate for weight reduction. These arms are great for off-road, drag racing and drifting vehicles alike. These arms run a ball joint to keep weight down as well.
Specs:
Lift: 0-3”
Minimum Rim Size: 16”
Maximum Tire Size: 33”
Track Width: Stock

What's Included:
Boxed LCA
Urethane Bushings
Black Powder Coat

Frontier 6" Bracket Lift Replacement Spindles

CJD-037

$1,485.00 Save $-1,485.00
Frontier 6" Bracket Lift Replacement Spindles

This spindle is meant to replace the existing spindle that comes with a 6" bracket lift. This spindle is fully fabricated and CAD designed. Designed for corrected steering position to help bump steer. No more shock contact due to steering arm position. Comes complete with full heim steering. This is a great upgrade for those that wheel with their bracket lifts. Built to order.

Note: With stock length control arms, this spindle will not work with 2.5" coilovers, only 2.0. Titan swap length works with both 2.0" and 2.5" coilovers

Specs: Lift: 6”

Minimum Rim Size: 16”

 

What's Included: Spindles

Billet Full Heim Steering

Grade 8 Hardware

Stainless Misalignments

All Needed Heims

Black Powder Coat

Frontier Adjustable Lift Shackles

CJD-038

$143.00 Save $-143.00
CJD Nissan Frontier Adjustable Lift Shackles

One piece CAD design with 5/16” plate. These shackles will give up to 2” of rear lift.

Specs:

Lift: 0-2” Lift

Stock Replacement

 

What's Included: Lift Shackles

Grade 8 Hardware

Black Powder Coat

Back to Nissan Frontier